Rocco Ring Net System Rockfall Protection Barrier Flexible Ring Net Barriers
The rocco ring net, also known as flexible ring net barriers, and rocco high tensile steel wire ring net are linked together using rings with a high tensile strength 3mm steel wire with a strength no less than 1770N/mm2. Anywhere between 5 and 19 spirals are bundled together into a ring measuring 30 or 35 in diameter to ensure an excellent buffering performance through its deformation. It features outstanding energy absorption properties, making it applicable for both active and passive protection systems. which between 5 and 19 spirals are bundled together into a ring measuring 30cm or 35cm in diameter. It has good buffering performance through its deformation, and it is with outstanding energy absorption properties and has a wide application for active and passive protection systems.
The rocco ring net system is composed of an SNS slope protection mesh, steel wire mesh, decompression rings, supporting rope, sewing rope, steel column, boundary rope, wire rope anchor and other installation components. The buffering, absorbing, and supporting performances are exerted to ensure an effective slope protection performance.
Rocco Ring Net Bundling Types
The rocco ring net features three types of bundling rings: ordinary pressed connection, direct winding, and spiral winding, each with an outstanding performance based on specific applications. The wire uniformly bears loads, features a simple appearance with no button joints, and has no broken ring failures during loading.
Rocco Ring Net System Types
Rocco Ring Net System VX Barrier:For narrower V-cuttings
In smaller mountain torrents, we anchor debris flow barriers to the channel flanks with no posts, instead using spiral rope anchors or self-drilling anchors with flexible anchor heads. The ring net is then hung from upper and lower support ropes outfitted with braking rings with the use of shackles. This structure is suitable for a width of up to 15 meters and an installation height of up to 6 meters.
Rocco Ring Net System UX Barrier: For wider, U-shaped Channels
The debris flows barrier for large mountain torrents is preferably supported by two posts in the river bed as well as with spiral rope anchors or flexible anchor heads. This structure is suitable for widths of about 25 meters and an installation height of up to 6 meters.
Product Parameters
| Debris Flow Barriers without posts Type |
VX060L-H4 |
VX080L-H4 |
VX140L-H4 |
VX100L-H4 |
VX160-H4 |
| Installation height |
2-4m |
2-4m |
2-4m |
5-6m |
5-6m |
| Span width |
up to 10m |
up to 15m |
up to 15m |
up to 15m |
up to 15m |
| Debris Flow Barriers with posts Type |
UX100-H4 |
UX160-H4 |
UX120-H6 |
UX180-H4 |
| Installation height |
|
|
|
|
| Span width |
|
|
|
|
Note: VX / UX 060-180 ... = Resistance to debris pressure and impulse during stopping, filling and overtopping process
VX / UX ... H4 / H6 = Maximum installation height in meters
UX/VX debris flow barriers providethe following features:
Ring net made of high-tensile steel wire
Optimum combination of stability and flexibility. The barrier absorbs high dynamic and static loads, allowing the net to retain its protective effect even when full of debris.
Simple to install
Lightweight components reduce the amount of work required during transport and construction. Difficult earthworks are not required and the barriers are easy to adapt to any terrain, offering both time and cost savings.
Corrosion and abrasion protection
Our corrosion protection concept ensures a long lifetime and low system maintenance costs. At exposed points the ropes are fitted with abrasion protection, which can easily be replaced as necessary.
Detailed Photos
Company Profile
Hebei Longen Wire Mesh Products Co.,Ltd is located in the hometown of Wire Mesh - Anping County, Hebei Province, China.
Established: 2015
Certificates: CE certificate, ISO9001:2015 certificate, BV certificate
Quality Control: Before each batch of orders leaves the factory, we will have professional inspectors to conduct strict inspections on the products and accessories to ensure that every product you receive is in perfect condition.
FAQ
1.Q: Can you provide samples?
A: We can provide samples in stock for free. Customized products need to be negotiated according to the situation, and customers need to pay for the courier fee. After confirming the order, we will return all the sample fees.
2.Q: Do you accept customized service or processing service code?
A: Yes, we can customize according to the specifications, drawings or samples you provide, and we can also design and provide samples according to your ideas.
){kind=link}