Basic Info.
After-sales Service
We Are Ready to Help at Any Time and Solve All Yo
Material
G60 Galvanized Steel
Application
Construction Wire Mesh, Protecting Mesh, Steel Base
Weave Characteristic
Stamping
Stamping Expanded Metal Mesh Category
Expanded Metal Mesh
Galvanized Surface Treatment
Hot-galvanize
Hot-galvanize Technique
Wire Annealing
Specifications
1.75ib,2.50ib,3.40ib
Packaged
25 Bundles or 250 Pieces Per Pallet
Wt. Per Sq. Yd.
2.50ibs / 3.40ibs
Transport Package
Iron or Wooden Pallets
Specification
1.75Ib/2.5Ib/3.4Ib
Product Description
Galvanized Expanded Metal Angle Beads reinforcement for conventional plaster
This kind ofAngle Beadscan also be written as expanded corner beads or diamond mesh corner beads. Popularly made of expanded metal sheets, it has a opening pattern of diamond mesh.
Expanded diamond mesh Angle Beads serves as a plastering stop to ensure a neat finish. It is designed to provide strong corner reinforcement for conventional plaster applications. A solid metal nose provides a straight, rigid ground and the 2-5/8" flanges can be easily flexed over irregular, uneven surfaces.
The Expanded Metal Angle Beads are easily installed using standard industry practice. Plaster keys near solid nose provide reinforcement where needed most to ensure straight corners. we offer this product in both galvanized steel and zinc plating for your choice. The expanded flange grounds can be 3/8", 1/2", 5/8", or 3/4" (1", 1-1/8", 1-1/4" and 1-1/2").
Wide expanded metal flange beads provide additional rigidity and strength with its reinforced flanges. This product is for use on masonry, beams, and column fireproofing. Combination of expanded flanges and pronounced bead nose ensures successful corner alignment and efficient plaster keying from edge to nose. This product is produced in the material of galvanized steel (zinc coating is available for special order) with full stiffening ribs to enhance durability.
Angle Bead Materials: Galvanized Steel, Aluminum, Stainless Steel, Zinc (99% pure zinc) Alloy. Wing Size: 30 mm, 40 mm, 50 mm, 60 mm, 70 mm. Length: 1 m - 2.85 m.
Category
Flat Diamond Metal Lath
Flat diamond metal lath is manufactured by slitting and stretching galvanized steel sheets to form small openings, thereby allowing the plaster keys to be bonded to the lath and offering better crack resistance and higher strength. Each sheet has square ends and smooth parallel edges for fast, easy handling and installation.
Flat diamond metal lath is used as plaster base and reinforcement on almost all type of walls, ceilings, over wood or steel framing, flat or curved surfaces. The large number of openings provide better stucco bonding property.
Diamond Expanded Metal LathDiamond Expanded Metal Lath is a kind of metal lath with asphalt saturated kraft building paper applied on the back to control moisture, air flow and reduce air infiltration, thereby providing improved energy efficiency. It is easy to install and is an ideal choice for serving as a base for stone, ceramic tile and traditional stucco.
The paper is waterproof. It provides sheathing protection against moisture during curing and forms a vertical surface behind the exterior wall cladding (stucco, brick, siding, etc.) to allow moisture safely drain out of the wall system.
Self-Furring Dimpled Metal LathSelf-furred dimpled metal lath is manufactured with evenly spaced indentations that hold the metal lath 1/4" away from the surface to be plastered to allow the plaster or stucco to be embedded more thoroughly into the lath and provide excellent mechanical bonding over the surface to be plastered.
Self-furring dimpled metal lath is extensively used in plaster works and serves as plaster reinforcement over interior masonry walls and in steel column fireproofing, or functions as a reinforcement for base coat in ceramic tile works.
Self-furring dimpled metal lath is also available with asphalt paper backing.Self-Furring V-Groove Metal LathSelf-furring v-groove metal lath is manufactured with 1/4" deep grooves and 5 grooves per sheet. These grooves are spaced 6" on the center along the length of the sheet and allow a thorough embedment into and behind the lath for superior mechanical bonding.
Self-furring v-groove metal lath is easily shaped for curved or contoured surfaces. It helps maintain consistent plaster depths and eliminates the need for added furring strips. To maintain the furring characteristics of v grooves, fasteners must be applied within the v-cavity.
Self-furring v-groove metal lath is widely used in plastering over surfaces such as concrete, cement board, column fireproofing, masonry surfaces as well as replastering over old surfaces. In addition, self-furring v-groove metal lath is available with asphalt paper backing.
Rib Lath With High Strength and Great Plaster Bonding CapacityRib lath is manufactured by punching and profiling galvanized steel sheet or stainless steel sheet.
Rib lath, also known as expanded ribbed lath, has V-ribs to offer an increased tensile strength and give a uniform plastering depth over a large coating area. Compared with common metal lath, V ribs provide added support capacity and its unique structure offers better permeability, thereby delivering greater plaster bonding and fixing properties.
It is extensively used in plastering works on walls and suspended ceilings and serves as plaster base for building construction.Rib lath without paperRib lath without paper has herringbone mesh patterns and 7 longitudinal solid steel ribs with a depth of 3/8" at an interval of 3-7/8" across the sheet.
Rib lath provides a maximum span of 24" on center. It can be used both vertically and horizontally to provide superior strength and exceptional rigidity. It is widely used in ceiling, wall and column plaster works.
Kraft paper-backed rib lathCompared with rib lath without paper, kraft paper-backed rib lath not only provides superior strength and exceptional rigidity, but also limits the loss of plaster when being applied on open framing.
Rib Lath Specification Table |
Type | Code | Rib Depth | Rib Distance | Sheet Size |
3/4" High Rib Lath (High Rib Stay Form) | HR | 3/4" | 98 | 27" × 97" |
HR3 | 19-20 mm | 100mm | 200 mm width |
HR4 | 19-20 mm | 100mm | 300 mm width |
HR5 | 19-20 mm | 100mm | 400 mm width |
HR6 | 19-20 mm | 100mm | 500 mm width |
HR7 | 19-20 mm | 100mm | 600 mm width |
HR8 | 19-20 mm | 100mm | 700 mm width |
3/8" Middle Rib Lath | MRB5 | 10mm | 150mm | 600 x 2200-2500 mm |
MRB7 | 10mm | 100mm | 600 x 2200-2500 mm |
MRB9 | 10mm | 75mm | 600 x 2200-2500 mm |
1/8" Flat Rib Lath | FRB5 | 4mm | 150mm | 600 x 2200-2500 mm |
FRB7 | 4mm | 100mm | 600 x 2200-2500 mm |
FRB9 | 4mm | 75mm | 600 x 2200-2500 mm |
Detailed Photos
Packaging & Shipping
Packing Detail:On pallet. 10pcs/bundle. 25bundle/pallet Application
Company Profile
FAQ
1,What is the material of your products ?
The materials used in our rib lath products include: low carbon steel, stainless steel plate, aluminum plate, copper plate, nickel plate, aluminum and magnesium alloy plateand other metal plate.
2, How much about your annual production capacity?
More than 2000 Tons
3,What makes your products different from other company's?
Fu lang si provide free design service, warranty service, with strictly quality control and very competitive price.
4,Can you make custom Expanded Rib Lath if I have a design in mind?
Of course, most of our exported rib lath products are customized according to customers' needs.
5,Can I get a pcs of your products sample?
Yes, free samples will be provided anytime.
Address:
50 Meters North of Nanzhai Village, Chengyouzi Township, Hengshui, Hebei, China
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Industrial Equipment & Components, Security & Protection
Management System Certification:
ISO 9001
Company Introduction:
Hebei Longen Wire Mesh Products Co., Ltd. Was established in 2015 and is located in Anping County, known as the "Hometown of Wire Mesh in China". The company has a registered capital of 20.15 million. The company relies on continuous technological innovation and quality improvement to create value for customers. We have established a management system based on ISO 9001 requirements and have become a benchmark enterprise in the industry.
Our factory regards quality as the lifeline. From management to front-line workers, we are highly focused on quality control of every detail, adopt advanced technology and processes, strictly follow quality standards and customer requirements, and ensure that every feature of the product meets optimal level. Committed to providing impeccable high-quality products to the world, our products have been exported to more than 30 countries and regions such as Southeast Asia, Australia, Europe, America, and Taiwan. Our good quality and service have won unanimous praise from customers.
The company′s main products include slope stabilization and rockfall protection systems and accessories (Soil or Rock Nails (Steel Anchor), Spike Plates, Connection Clips T3), 3D vegetation mesh, metal laths (expanded metal laths, Welded wire laths, paper-backed laths), sound barriers, stainless steel cable mesh, zoo mesh, aviary mesh, hexagonal metal refractory materials, wire mesh fence, welded wire mesh, mine sieving mesh, perforated metal, chain link fence and other steel wire mesh products, these products are widely used In the fields of geotechnical engineering, water conservancy engineering, transportation facilities, housing construction, garden engineering construction and other fields.
We look forward to cooperating with you, providing you with high-quality products, competitive market prices, ensuring on-time and quantity delivery, and establishing a good, long-term, win-win cooperative relationship with you.