27"× 96" Diamond Galvanized Expanded Metal Lath 2.5ibs for Stucco Building Walls

• Customization: Available
• After-sales Service: We Are Ready to Help at Any Time and Solve All Yo
• Material: Galvanized Sheet Plate
• Model NO.: 1.75 lbs, 2.5 lbs, 3.4 lbs.
• Application: Construction Wire Mesh, Protecting Mesh, Plastering
• Hole Shape: Diamond
• Usage: Protection, Civil Building, Plastering
• Weave Characteristic: Stamping
• Surface Treatment: Galvanized
• Stamping Expanded Metal Mesh Category: Expanded Metal Mesh
• Galvanized Surface Treatment: Hot-galvanize
• Hot-galvanize Technique: Wire Annealing
• Specifications: 1.75ib,2.50ib,3.40ib
• Weight: Light-weight
• Sheet Size: 27"X 96"
• Pieces Bundle: 10
• Yards/Pallet: 500
• Product Series: Paper Backed Flat Diamond Mesh Lath
• Transport Package: Wooden Pallet or Wooden Case Can as Per Clients Re
• Specification: 1.75Ib/2.5Ib/3.4Ib
• Trademark: LONGEN
• Origin: China
• Production Capacity: 50000

Product Description

We have always insisted on making high-quality wire mesh products.

Product Description

Expanded metal lath is widely applied on wall, ceiling and other building plastering works, including the reinforcement and renovation of joints and cracks as it offers better plaster bonding property and enhanced crack resistance.

Expanded Metal Lath Specifications
Weight per Square Yard (lb/yd2)	Sheet Size	Pieces/Bundle	Yards/Pallet
1.75	27"×96"	10	500
2.5	27"×96"	10	500
3.4	27"×96"	10	500

Category

Flat Diamond Metal Lath

Flat diamond metal lath is manufactured by slitting and stretching galvanized steel sheets to form small openings, thereby allowing the plaster keys to be bonded to the lath and offering better crack resistance and higher strength. Each sheet has square ends and smooth parallel edges for fast, easy handling and installation.

Flat diamond metal lath is used as plaster base and reinforcement on almost all type of walls, ceilings, over wood or steel framing, flat or curved surfaces. The large number of openings provide better stucco bonding property.

 

Paper-Backed Lath

Paper-backed lath is a kind of metal lath with asphalt saturated kraft building paper applied on the back to control moisture, air flow and reduce air infiltration, thereby providing improved energy efficiency. It is easy to install and is an ideal choice for serving as a base for stone, ceramic tile and traditional stucco.

The paper is waterproof. It provides sheathing protection against moisture during curing and forms a vertical surface behind the exterior wall cladding (stucco, brick, siding, etc.) to allow moisture safely drain out of the wall system.

 

Self-Furring Dimpled Metal Lath

Self-furred dimpled metal lath is manufactured with evenly spaced indentations that hold the metal lath 1/4" away from the surface to be plastered to allow the plaster or stucco to be embedded more thoroughly into the lath and provide excellent mechanical bonding over the surface to be plastered.

Self-furring dimpled metal lath is extensively used in plaster works and serves as plaster reinforcement over interior masonry walls and in steel column fireproofing, or functions as a reinforcement for base coat in ceramic tile works.

Self-furring dimpled metal lath is also available with asphalt paper backing.
 

 

Self-Furring V-Groove Metal Lath

Self-furring v-groove metal lath is manufactured with 1/4" deep grooves and 5 grooves per sheet. These grooves are spaced 6" on the center along the length of the sheet and allow a thorough embedment into and behind the lath for superior mechanical bonding.

Self-furring v-groove metal lath is easily shaped for curved or contoured surfaces. It helps maintain consistent plaster depths and eliminates the need for added furring strips. To maintain the furring characteristics of v grooves, fasteners must be applied within the v-cavity.

Self-furring v-groove metal lath is widely used in plastering over surfaces such as concrete, cement board, column fireproofing, masonry surfaces as well as replastering over old surfaces. In addition, self-furring v-groove metal lath is available with asphalt paper backing.
 

 

Rib Lath 
Rib lath is manufactured by punching and profiling galvanized steel sheet or stainless steel sheet.

Rib lath, also known as expanded ribbed lath, has V-ribs to offer an increased tensile strength and give a uniform plastering depth over a large coating area. Compared with common metal lath, V ribs provide added support capacity and its unique structure offers better permeability, thereby delivering greater plaster bonding and fixing properties.

It is extensively used in plastering works on walls and suspended ceilings and serves as plaster base for building construction.

 

Rib lath without paper

Rib lath without paper has herringbone mesh patterns and 7 longitudinal solid steel ribs with a depth of 3/8" at an interval of 3-7/8" across the sheet.

Rib lath provides a maximum span of 24" on center. It can be used both vertically and horizontally to provide superior strength and exceptional rigidity. It is widely used in ceiling, wall and column plaster works.

Detailed Photos

Packaging & Shipping