Paper-Backed Metal Lath for Stucco and Plaster Reinforcing

• Customization: Available
• After-sales Service: We Are Ready to Help at Any Time and Solve All Yo
• Warranty: We Are Ready to Help at Any Time and Solve All Yo
• Model NO.: LE-PBL
• Material: Galvanized Sheet Plate
• Application: Construction Wire Mesh
• Hole Shape: Diamond
• Usage: Masonry Walls
• Weave Characteristic: Stamping
• Surface Treatment: Galvanized
• Stamping Expanded Metal Mesh Category: Expanded Metal Mesh
• Galvanized Surface Treatment: Hot-galvanize
• Hot-galvanize Technique: Wire Annealing
• Specifications: 1.75ib / 2.5ib / 3.4ib
• Weight: Miniature
• Pieces Per Bundle: 10
• Bundles Per Pallet: 25
• Sq. Yds. Per Bundle: 500
• Storage: Store in a Dry Place Protected From Moisture
• Transport Package: Wood Pallet Packing / Steel Pallet Packing
• Specification: 27 in. x97 in
• Trademark: LONGEN
• Origin: China
• Production Capacity: 50000

Product Description

Paper Backed Diamond Mesh Lath
It provides protection against wet areas during stucco curing. Paper-Backed Lath comes in flat and self-furring configurations to accommodate your installation needs.
Optional 60-minute Grade-D paper available for higher weather resistance and durability.
Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives.

GALVANIZED EXPANDED STEEL 
PLASTER/STUCCO BASE

A superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB) metal lath is used behind stone, traditional stucco, and tile installations as a code compliant weather resistant barrier.


Woven Wire Lath

Application(s): Stone Veneer, Stucco

Product Parameters

Material: G60 Galvanized Steel
              Type 1, Grade-D, Style 2 Paper
Packaged: 25 bundles or 250 pieces per pallet

Expanded Metal Lath Specifications
Weight per Square Yard (lb/yd2)	Sheet Size	Pieces/Bundle	Yards/Pallet
1.75	27"×96"	10	500
2.5	27"×96"	10	500
3.4	27"×96"	10	500

Storage:
All stored materials shall be kept dry and out of the weather. Materials shall be stacked off the ground,supported on a level platform, and protected from the weather and surface contamination per ASTMC847 & C1063. Paperbacked lath should not be stored outside where ran water can become trapped between sheets, thereby oxidizing the metal.

Category

Flat Diamond Metal Lath

Flat diamond metal lath is manufactured by slitting and stretching galvanized steel sheets to form small openings, thereby allowing the plaster keys to be bonded to the lath and offering better crack resistance and higher strength. Each sheet has square ends and smooth parallel edges for fast, easy handling and installation.

Flat diamond metal lath is used as plaster base and reinforcement on almost all type of walls, ceilings, over wood or steel framing, flat or curved surfaces. The large number of openings provide better stucco bonding property.

Paper-Backed Lath

Paper-backed lath is a kind of metal lath with asphalt saturated kraft building paper applied on the back to control moisture, air flow and reduce air infiltration, thereby providing improved energy efficiency. It is easy to install and is an ideal choice for serving as a base for stone, ceramic tile and traditional stucco.

The paper is waterproof. It provides sheathing protection against moisture during curing and forms a vertical surface behind the exterior wall cladding (stucco, brick, siding, etc.) to allow moisture safely drain out of the wall system.


Self-Furring Dimpled Metal Lath

Self-furred dimpled metal lath is manufactured with evenly spaced indentations that hold the metal lath 1/4" away from the surface to be plastered to allow the plaster or stucco to be embedded more thoroughly into the lath and provide excellent mechanical bonding over the surface to be plastered.

Self-furring dimpled metal lath is extensively used in plaster works and serves as plaster reinforcement over interior masonry walls and in steel column fireproofing, or functions as a reinforcement for base coat in ceramic tile works.

Self-furring dimpled metal lath is also available with asphalt paper backing.


Self-Furring V-Groove Metal Lath

Self-furring v-groove metal lath is manufactured with 1/4" deep grooves and 5 grooves per sheet. These grooves are spaced 6" on the center along the length of the sheet and allow a thorough embedment into and behind the lath for superior mechanical bonding.

Self-furring v-groove metal lath is easily shaped for curved or contoured surfaces. It helps maintain consistent plaster depths and eliminates the need for added furring strips. To maintain the furring characteristics of v grooves, fasteners must be applied within the v-cavity.

Self-furring v-groove metal lath is widely used in plastering over surfaces such as concrete, cement board, column fireproofing, masonry surfaces as well as replastering over old surfaces. In addition, self-furring v-groove metal lath is available with asphalt paper backing.


Rib Lath With High Strength and Great Plaster Bonding Capacity

Rib lath is manufactured by punching and profiling galvanized steel sheet or stainless steel sheet.

Rib lath, also known as expanded ribbed lath, has V-ribs to offer an increased tensile strength and give a uniform plastering depth over a large coating area. Compared with common metal lath, V ribs provide added support capacity and its unique structure offers better permeability, thereby delivering greater plaster bonding and fixing properties.

It is extensively used in plastering works on walls and suspended ceilings and serves as plaster base for building construction.

Rib lath without paper

Rib lath without paper has herringbone mesh patterns and 7 longitudinal solid steel ribs with a depth of 3/8" at an interval of 3-7/8" across the sheet.

Rib lath provides a maximum span of 24" on center. It can be used both vertically and horizontally to provide superior strength and exceptional rigidity. It is widely used in ceiling, wall and column plaster works.


Kraft paper-backed rib lath

Compared with rib lath without paper, kraft paper-backed rib lath not only provides superior strength and exceptional rigidity, but also limits the loss of plaster when being applied on open framing.

Rib Lath Specification Table
Type	Code	Rib Depth	Rib Distance	Sheet Size
3/4" High Rib Lath (High Rib Stay Form)	HR	3/4"	98	27" × 97"
	HR3	19-20 mm	100mm	200 mm width
	HR4	19-20 mm	100mm	300 mm width
	HR5	19-20 mm	100mm	400 mm width
	HR6	19-20 mm	100mm	500 mm width
	HR7	19-20 mm	100mm	600 mm width
	HR8	19-20 mm	100mm	700 mm width
3/8" Middle Rib Lath	MRB5	10mm	150mm	600 x 2200-2500 mm
	MRB7	10mm	100mm	600 x 2200-2500 mm
	MRB9	10mm	75mm	600 x 2200-2500 mm
1/8" Flat Rib Lath	FRB5	4mm	150mm	600 x 2200-2500 mm
	FRB7	4mm	100mm	600 x 2200-2500 mm
	FRB9	4mm	75mm	600 x 2200-2500 mm

Detailed Photos

Packaging & Shipping

Application