Tecco Mesh Nets Against Falling Rocks Slope Protection Wire Mesh

• Product Name: Tecco Mesh
• Mesh Shape: Rhomboid
• Mesh Width: Inscribed Circle Diameter of Mesh 65 mm
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: LE-TM65/3
• Wire Diameter: 2.0mm, 3.0mm, 4.0mm, 4.6mm
• Tensile Strength: 1770MPa
• Roll Width: 3.5m Construction
• Roll Length: 10m 20m 30m Construction
• Compound: 95% Zn / 5% Ai
• Coating: Min. 150g /M2
• Mesh Edges: Mesh Ends Knotted
• Transport Package: Customer′ S Requirement Acceptable
• Specification: 10m, 20m, 30m, as per site requirement
• Trademark: LONGEN
• Origin: China
• HS Code: 73144100
• Production Capacity: 50000

Product Description

TECCO Mesh Nets Against Falling Rocks Slope Protection Wire Mesh

One wire has a tensile strength of more than 1770 N/mm² limiting elongation and keeping the mesh highly pre-tensioned, providing reliable stability for the slope and minimizing deformations.

TECCO mesh, featuring 2 mm, 3 mm or 4 mm wire made from high-tensile steel, can be used to stabilize virtually any kind of slope, whether it consists of rock or loose soil. Coupled with either of three different sized spike plates, the TECCO offers an attractive nail grid and, therefore, maximum efficiency during installation.
TECCO Mesh System:
Main Components
The TECCO system consists of four main components that are carefully coordinated with the others:
 

TECCO mesh is made of the high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.
1.Wire diameter : 3.0 mm
2.high tensile strength 1770Mpa
3.Diagonal : 83 · 143mm (+/-3%)
4.Mesh shape:diamond
5.Material:high tensile steel wire
6. Corrosion protection:super coating
7. Coating:150g/m2
8. Breaking load of single wire:12.5KN
9. Tensile strength:110KN/m
Mesh edges knotted
Roll width:2.3m-3.5m
Roll length:110m-30m
 

 

TECCO Spike Plates
Rigid spike plates reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the TECCO mesh.
These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope.
The plates are galvanized and have dimensions of 13.0''*7.5"*0.3"/0.4"(330mm*190mm*8/10mm), 13.0''*7.08"*0.3"/0.4"(330mm*180mm*8/10mm), 13.0''*7.5"*0.3"/0.4"(330mm*205mm*8/10mm), etc.

 

Soil or Rock Nails (Steel Anchor)
The main anchors of the system are installed in a grid typically from 6.6 to 13.1 ft (2.0 to 4.0m) horizontal and vertical spacing. Anchor consists of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Self-drilling grout injection anchors are also permitted. Additional anchors may also be used to provide added support at boundaries and in low points and hollows.

 

TECCO Connection Clips T2 / T3
The high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These clips are hot-dip galvanized and consist of 0.16" (4mm) or 0.25"(6mm) thick steel spirals.

 

Detailed Photos

Packaging & Shipping

Company Profile