more than 1770 High-Tensile Rockfall Protection Netting for slope
One wire has a tensile strength of more than 1770 N/mm² limiting elongation and keeping the mesh highly pre-tensioned, providing reliable stability for the slope and minimizing deformations.
Rockfall Protection Netting featuring 2 mm, 3 mm or 4 mm wire made from high-tensile steel, can be used to stabilize virtually any kind of slope, whether it consists of rock or loose soil. Coupled with either of three different sized spike plates, the TECCO offers an attractive nail grid and, therefore, maximum efficiency during installation.
Rockfall Protection Netting System:
Main Components
The TECCO system consists of four main components that are carefully coordinated with the others:
Rockfall Protection Netting is made of the high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.
1.Wire diameter : 3.0 mm
2.high tensile strength 1770Mpa
3.Diagonal : 83 · 143mm (+/-3%)
4.Mesh shape:diamond
5.Material:high tensile steel wire
6. Corrosion protection:super coating
7. Coating:150g/m2
8. Breaking load of single wire:12.5KN
9. Tensile strength:110KN/m
Mesh edges knotted
Roll width:2.3m-3.5m
Roll length:110m-30m
TECCO Spike Plates
Rigid spike plates reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the Rockfall Protection Netting.
These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope.
The plates are galvanized and have dimensions of 13.0''*7.5"*0.3"/0.4"(330mm*190mm*8/10mm), 13.0''*7.08"*0.3"/0.4"(330mm*180mm*8/10mm), 13.0''*7.5"*0.3"/0.4"(330mm*205mm*8/10mm), etc.
Soil or Rock Nails (Steel Anchor)
The main anchors of the system are installed in a grid typically from 6.6 to 13.1 ft (2.0 to 4.0m) horizontal and vertical spacing. Anchor consists of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Self-drilling grout injection anchors are also permitted. Additional anchors may also be used to provide added support at boundaries and in low points and hollows.
TECCO Connection Clips T2 / T3
The high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These clips are hot-dip galvanized and consist of 0.16" (4mm) or 0.25"(6mm) thick steel spirals.
Detailed Photos
Packaging & Shipping
Company Profile
Audited Supplier 
Rockfall Protection Netting System:
){kind=link}