Rockfall Protection Neting G65/3 G65/4 G80/3 G80/4 Steel Wire Mesh Diamond Rockfall Barrier Fence Tecco Mesh High-Tensile Steel Wire Slope Protective Mesh

• Customization: Available
• Product Name: Tecco Mesh
• Mesh Shape: Rhomboid
• Model NO.: LETM-001
• Mesh Width: Inscribed Circle Diameter of Mesh 65 mm
• Wire Diameter: 2.0mm, 3.0mm, 4.0mm, 4.6mm
• Tensile Strength: 1770MPa
• Roll Width: 3.5m Construction
• Roll Length: 10m 20m 30m Construction
• Compound: 95% Zn / 5% Ai
• Coating: Min. 150g /M2
• Mesh Edges: Mesh Ends Knotted
• Transport Package: Customer′ S Requirement Acceptable
• Specification: 10m, 20m, 30m, as per site requirement
• Trademark: LONGEN
• Origin: China
• HS Code: 73144100
• Production Capacity: 50000

Product Description

TECCO mesh is made of 2.0mm, 3.0mm or 4.0mm high-strength steel wire. It is used in coordination with soil nails or rock nails, anchor , spike plate and other components to form an efficient, economical and sustainable rockfall protection and slope stabilization system to prevent or intercept the rupture of loose or weathered surfaces on the slope.

Our factory mainly produces Tecco mesh with specifications such as G45/2, G65/3, G65/4, G80/3, G80/4, etc. We can also customize other specifications according to on-site requirements.
 

TECCO Mesh System:
Main Components
The TECCO system consists of four main components that are carefully coordinated with the others:
 

TECCO mesh is made of the high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.
1.Wire diameter : 3.0 mm
2.high tensile strength 1770Mpa
3.Diagonal : 83 · 143mm (+/-3%)
4.Mesh shape:diamond
5.Material:high tensile steel wire
6. Corrosion protection:super coating
7. Coating:150g/m2
8. Breaking load of single wire:12.5KN
9. Tensile strength:110KN/m
Mesh edges knotted
Roll width:2.3m-3.5m
Roll length:110m-30m
 

 

TECCO Spike Plates
Rigid spike plates reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the TECCO mesh.
These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope.
The plates are galvanized and have dimensions of 13.0''*7.5"*0.3"/0.4"(330mm*190mm*8/10mm), 13.0''*7.08"*0.3"/0.4"(330mm*180mm*8/10mm), 13.0''*7.5"*0.3"/0.4"(330mm*205mm*8/10mm), etc.

 

Soil or Rock Nails (Steel Anchor)
The main anchors of the system are installed in a grid typically from 6.6 to 13.1 ft (2.0 to 4.0m) horizontal and vertical spacing. Anchor consists of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Self-drilling grout injection anchors are also permitted. Additional anchors may also be used to provide added support at boundaries and in low points and hollows.

 

TECCO Connection Clips T2 / T3
The high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These clips are hot-dip galvanized and consist of 0.16" (4mm) or 0.25"(6mm) thick steel spirals.

 

Detailed Photos

Packaging & Shipping

Company Profile